Skip to content
Chimney & Duct Cleaning in Brooklyn, NY

Chimney, Dryer Vent and Air Duct Service for Brooklyn Homes

We clean, inspect and repair chimneys and vents for homes in Marine Park, Mill Basin, Bergen Beach, Flatlands, Canarsie, Midwood, Sheepshead Bay and nearby Brooklyn neighborhoods.

Chimney sweep cleaning a brick chimney on a rowhouse roof

Services

Chimney and duct work we do

From routine sweeping to rebuilding a chimney above the roofline, here is the work we do on chimneys, fireplaces, dryer vents and air ducts. Each job starts with a look at the actual condition of your system.

All services

Warning signs

Call us if you notice any of these

Most problems give a warning first. Catching them early keeps a small fix from turning into a big one.

  • A strong smoky or musty smell coming from the fireplace
  • Smoke drifting into the room instead of going up the flue
  • Clothes taking longer than usual to dry
  • Crumbling mortar or loose bricks on the chimney exterior
  • Water stains on the ceiling or wall near the chimney
  • Pieces of flue tile or debris falling into the firebox
Technician lowering an inspection camera into a chimney flue

About us

Chimney and Vent Work Built Around How Brooklyn Homes Are Made

ApexHearth Chimney Services cleans, inspects and repairs chimneys, fireplaces, dryer vents and air ducts for homes across southern Brooklyn. Our work starts with looking: a technician examines the flue, firebox, damper, crown and flashing, then explains what is there and what it means for your home. Many houses in this part of Brooklyn share walls, sit close to the water, or have boilers that were converted from oil to gas, and each of those details changes how a chimney wears over time. We take that into account rather than handing every home the same checklist. When something needs repair, you get a written price and photos before any work begins, and you decide what happens next. When it does not need work, we tell you that too. Our certified technicians lay down drop cloths, use sealed vacuum equipment, and clean up before they leave. The goal is simple: a system that vents safely, heats properly and is ready for the cold months.

More about how we work

Straight pricing

No bait prices. No surprises.

  • Written price first

    Before any work starts, you get a written price for exactly what we plan to do. Nothing begins until you approve it.

  • Photos of the findings

    We photograph what we find inside the flue, on the crown or in the vent, so you can see the problem for yourself.

  • No surprise add-ons

    If we find something new mid-job, we stop and show you before doing any extra work. The approved scope is the scope.

What affects the price →

How it works

Clear steps. Your approval first.

  1. Book a visit

    Call or send a short request: the fireplace, stove, boiler flue or vents you need looked at, and what you have noticed.

  2. We inspect first

    The crew lays down drop cloths, checks the system top to bottom and runs a camera up the flue where it is needed.

  3. Written price, your call

    You see photos of what we found and get the price in writing. Work starts only after you say yes.

  4. Clean, fix, report

    We sweep, repair or reline, vacuum up with HEPA filters and leave you a photo report of the finished work.

Inspections

Three levels of chimney inspection

The NFPA 211 standard calls for a yearly inspection. Which level you need depends on what has changed since the last one.

  1. Level 1

    Annual check

    For a chimney and appliance that have not changed and will be used the same way: the readily accessible parts of the chimney, the flue and the connection, checked for soundness, blockages and deposits.

  2. Level 2

    Camera inspection

    When something changed — a new stove, insert or boiler, a fuel switch such as oil to gas, the sale of the home, or a chimney fire, storm or quake. Adds a video scan of the whole flue and the accessible attic, roof and crawl spaces.

  3. Level 3

    Concealed areas

    Only when a Level 1 or 2 points to a hidden hazard that cannot be checked any other way: parts of the chimney or building are opened to reach it.

How each level works

Book before the first cold night

Fall is the busiest time for chimney sweeps. Get your sweep and yearly inspection on the calendar before you light the first fire.

Request Service

Where we work

Every kind of home in Brooklyn

  • Rowhouses and brownstones

    Chimneys in attached homes often share a stack or sit right next to a neighbor's flue, so we check that each flue is separate and sealed. Roof access can be tight, which affects how we stage cap, crown and rebuilding work.

  • Detached homes

    Freestanding houses usually have more exposed chimney masonry, so weather, flashing and the crown get closer attention. Many also have longer dryer vent runs that collect more lint.

  • Co-ops and apartment buildings

    Larger buildings run boilers through tall masonry flues that work hard through the heating season. Work here often means coordinating with boards or management, and an oil-to-gas conversion usually raises the question of a new liner.

FAQ

Common questions

Don’t see your question? Call (843) 895-6422 and we’ll talk it through.

How often should my chimney be inspected?

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. A yearly inspection also tells you whether the flue actually needs sweeping.

What is the difference between Level 1, 2 and 3 inspections?

A Level 1 inspection is the routine check when nothing about the system has changed. A Level 2 is called for when something changes, such as a new appliance or a switch of fuel, or when the home is sold. A Level 3 is used when a suspected hidden hazard can only be reached by opening part of the chimney or building.

We converted our boiler from oil to gas. Do we need a new liner?

Often, yes. In New York City, the chimney has to be evaluated when a boiler converts from oil to gas, and a new liner is frequently needed because gas exhaust produces acidic condensate that can corrode a masonry flue. We inspect the flue and show you what we find before recommending a liner.

Why does dryer vent cleaning matter?

According to the U.S. Fire Administration, failure to clean is the leading factor contributing to clothes dryer fires in homes. Lint builds up in the vent run over time, and long or crowded runs build up faster.

Will air duct cleaning improve my health?

The U.S. EPA says duct cleaning has not been shown to prevent health problems. It advises cleaning when there is substantial visible mold growth, vermin, or excessive dust and debris. We will tell you honestly whether your ducts meet that bar, and we are cautious with chemical treatments.

When is the best time to schedule chimney work?

Before the heating season is ideal. New York City's heat season runs from October 1 through May 31, and building owners must keep apartments at the city's minimum temperatures during that time, so late summer and early fall are good windows for inspections and repairs.

Why does my fireplace smell, especially in summer?

Creosote and soot deposits in the flue can give off odor when humidity rises or air pressure in the house pulls air down the chimney. A sweep, a properly closing damper and a cap usually help, and an inspection will show which applies.

Find Out What Your Chimney or Vents Need

Schedule an inspection and we will show you what we find, explain your options and give you a written price before any work begins.

(843) 895-6422
Call (843) 895-6422 Request Service