What Chimney and Air Duct Work Costs, and Why
Most people who contact us about chimney or duct work want to know one thing first: what will this cost? The honest answer is that it depends on the house, the system and what we find once we're there. A sweep on an easy-to-reach brownstone fireplace is a different job from a tall flue serving an oil boiler in a co-op. This page explains what moves the price up or down for each of our services, how we quote, and what to watch out for in advertised offers that seem too cheap to be real.
What Affects the Price of a Chimney Sweep
A sweep is the most predictable job we do, but no two chimneys are the same. Before we quote, we want to know what's connected to the flue and how we'll reach it.
If the sweep turns up a problem, we stop and show you before doing anything beyond what you approved.
- Height and roof access: a short chimney we can reach from a ladder takes less setup than a tall stack on a steep roof, or a building where we have to go up through a bulkhead or hatch.
- Fuel type: wood-burning fireplaces build up creosote, oil appliances leave soot and scale, and gas appliances usually leave less buildup but still need the vent checked.
- Flue size and shape: large or odd-shaped flues, offsets, and several flues in one chimney take more time and different brushes.
- Amount of buildup: light soot comes off quickly. Heavy or glazed creosote takes more passes and sometimes a rotary tool or chemical treatment.
- Condition: loose brick, missing mortar, or debris like nests can slow the work and change what we recommend.
Chimney Inspection: Level 1 vs. Level 2
The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. The level of inspection your situation calls for is what mainly drives the price.
A Level 1 inspection is for a system that hasn't changed. We check the readily accessible parts of the chimney, the firebox, the damper and the connections, and confirm the flue is clear. It's the simplest and least costly level.
A Level 2 inspection is called for when something changes, such as a new appliance or a switch of fuel, or when the home is being sold. It includes a camera run through the full length of the flue, plus a look at accessible attic, basement and roof areas. The extra time, equipment and written report make it cost more than a Level 1. A Level 3 inspection means opening part of the chimney or building to reach a hidden hazard. It's uncommon and priced on its own.
Repairs, Liners and Larger Masonry Work
Repair pricing depends almost entirely on what's wrong and how hard it is to reach. A cracked crown, a few failed mortar joints or a stuck damper are small jobs. Spalling brick down the side of a tall chimney, water damage inside a chase, or a stack that has to come down and be rebuilt are large ones.
- Chimney Liner Installation: flue size, height, the number of bends or offsets, the liner material, and whether the old flue has to be cleared or enlarged first.
- Oil-to-gas conversions: when a New York City building converts its boiler from oil to gas, the chimney has to be evaluated, and a new liner is often needed because gas exhaust produces acidic condensate that can corrode a masonry flue.
- Chimney Cap & Chase Cover: the size, whether it's a standard fit or custom-made, and how many flues it covers.
- Chimney Waterproofing: how much masonry is exposed and whether repairs have to happen before sealing.
- Fireplace & Damper Repair: whether the existing part can be fixed, swapped for a standard part, or replaced with a top-mount damper.
- Chimney Rebuilding: how much of the stack comes down, its height, matching the brick, and roof access.
Air Duct and Dryer Vent Cleaning
For Air Duct Cleaning, the biggest factors are the number of supply vents and returns, the length and layout of the ductwork, and how much is inside it. The EPA advises cleaning ducts when there is substantial visible mold growth, signs of vermin, or excessive dust and debris. It also says duct cleaning hasn't been shown to prevent health problems, so we won't sell it to you as a fix for allergies.
Dryer Vent Cleaning is priced by the length of the run, how many turns it has, where it exits (a wall, the roof or a shared shaft), and how packed with lint it is. According to the U.S. Fire Administration, failure to clean is the leading factor contributing to home clothes dryer fires, so this is a job worth not putting off.
Apartments and co-ops add their own variables: building rules on work hours, elevator reservations, protecting hallways, and getting roof or mechanical-room access through the super or management. We sort these out before the visit so the day goes smoothly.
Why We Give a Written Price After We See the Job
When you first reach out, we can tell you what usually affects the cost of your kind of job. A firm price comes after we've looked at the chimney or the ductwork, because guessing in either direction doesn't help you. You get the price in writing, with the scope of work spelled out, before we start.
Be careful with very cheap whole-house duct cleaning offers. The EPA itself tells consumers to research the process before responding to them. The low advertised price usually covers a handful of vents and a quick vacuum. Once the crew is inside, the extras appear: per-vent charges, returns and dryer vents that weren't included, and mold treatments or sanitizer fogging. The EPA also urges caution with chemical treatments in ducts. We'd rather quote the real job once and stick to it.
Why can't you give me an exact price before you see the chimney?
Height, roof access, fuel type, flue condition and the amount of buildup all change the work involved. We can explain the likely factors up front, then give you a written price once we've seen the job.
Why does a Level 2 inspection cost more than a Level 1?
A Level 2 includes a camera run through the entire flue and a look at accessible attic, basement and roof areas. It's needed after a system change, such as a new appliance or a switch of fuel, or when a home is sold, and it takes more time and equipment.
Will converting my boiler from oil to gas add chimney costs?
Often, yes. In New York City the chimney has to be evaluated as part of an oil-to-gas conversion, and a new liner is frequently needed because gas exhaust creates acidic condensate that can corrode a masonry flue.
What's wrong with a cheap whole-house duct cleaning deal?
The advertised price usually covers very little, and the bill grows with per-vent charges and add-on chemical treatments. The EPA warns consumers to research the process before responding to these offers and to be careful with chemical treatments.
Does living in an apartment or co-op change the price?
It can. Building rules on work hours, elevator use, hallway protection and roof access affect how long a job takes. We coordinate with management ahead of time and factor that into your written price.
What makes dryer vent cleaning cost more or less?
The length of the vent run, the number of turns, where it exits, and how much lint has built up. Long runs that exit through the roof or a shared shaft take more time than a short run out a wall.
Find Out What Your Chimney or Vents Need
Schedule an inspection and we will show you what we find, explain your options and give you a written price before any work begins.