Skip to content

Chimney Liner Installation in Manhattan Beach, Brooklyn

Serving Manhattan Beach and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (843) 895-6422

The short answer

If your Manhattan Beach home has a cracked clay flue, an unlined chimney, or a boiler that was converted from oil to gas, you likely need a new chimney liner. Our certified technicians inspect the flue first, then size and install a liner that matches the appliance it serves.

A chimney liner is the protective channel inside your flue that carries smoke and exhaust gases out of the house and keeps heat and corrosive byproducts away from the surrounding masonry. In Manhattan Beach, many homes have masonry chimneys that were built for oil or wood, and a lot of those flues are now venting gas boilers, water heaters or newer fireplace inserts. When the appliance changes and the liner stays the same, problems can follow. ApexHearth Chimney Services installs chimney liners for homes in Manhattan Beach and ZIP code 11235, about 2 miles south of our Brooklyn office, so scheduling an evaluation and the follow-up work is straightforward.

Why Liners Matter in Manhattan Beach Homes

Manhattan Beach is largely made up of detached and semi-attached houses, along with some multi-family and apartment buildings. Many of these homes have brick chimneys serving a basement boiler, a water heater, a fireplace, or some combination. Over decades of use, clay tile liners can crack, mortar joints can erode, and some older chimneys were never lined at all.

A damaged or missing liner lets heat reach wood framing near the chimney, allows exhaust to leak through gaps in the masonry, and exposes brick and mortar to moisture and acids. The result can be crumbling interior masonry, staining on walls next to the chimney, and a flue that no longer drafts the way it should.

  • Cracked, shifted or missing clay flue tiles
  • White staining, flaking or damp spots on walls near the chimney
  • Pieces of tile or masonry collecting at the base of the flue
  • A new boiler, water heater or insert that needs a properly sized flue
  • Poor draft or exhaust odors when the appliance runs
Chimney Liner Installation at a home

Oil-to-Gas Conversions and Your Chimney

When a New York City building converts its boiler from oil to gas, the chimney has to be evaluated as part of the work. A new liner is often needed because gas exhaust produces acidic condensate that can corrode a masonry flue. An old flue that handled oil for years may not hold up to that moisture, and its size may not suit the new appliance.

If you are planning a conversion, or already completed one without relining, we can inspect the chimney and recommend a liner sized for the new boiler. We coordinate with your heating contractor so the venting and the appliance work together.

How We Install a Chimney Liner

Every job starts with an inspection. The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year, and it describes a Level 2 inspection for situations like a new appliance or a change in fuel. That is usually the right starting point before relining, and it often includes a camera look at the inside of the flue.

Based on what we find, we recommend a liner type and size. Stainless steel liners are a common choice for gas and oil appliances and for wood-burning inserts. For some masonry chimneys, a cast-in-place liner that forms a new smooth flue inside the old one may be a better fit. We explain the options and why one makes sense for your home.

  • Inspect the flue and confirm what appliances it serves
  • Clean the chimney so the liner goes into a clear flue
  • Size the liner to the appliance and the chimney height
  • Install the liner, connections and top cap
  • Test draft and walk you through the finished work

Time for your annual chimney check?

Planning Around Heat Season

New York City's heat season runs from October 1 through May 31, when building owners must keep apartments heated to the city's minimum temperatures. If you own a multi-family home or rent out a unit in Manhattan Beach, a chimney that serves the boiler needs to be ready before the cold sets in.

Relining a boiler flue usually means shutting the heating system down for part of the job, so late spring and summer are the easiest times to schedule. If a problem shows up mid-winter, call us and we will work with you to plan the work around keeping the building heated. We also serve nearby Sheepshead Bay, Gerritsen Beach, Madison, Marine Park and Mill Basin.

More services in Manhattan Beach

Related

Chimney sweep cleaning a brick chimney on a rowhouse roof

Book Chimney Liner Installation in Manhattan Beach

Serving Manhattan Beach and nearby cities.

  • Diagnosis before any repair
  • Written price up front
  • Written price before we start

What to expect

How a visit goes

  1. Inspection comes first

    Before we sweep, patch or replace anything, we look at the whole system and tell you what we see in plain language.

  2. Your home stays clean

    We cover the work area, run vacuum equipment that contains soot and dust, and leave the room the way we found it.

  3. You make the call

    We lay out what is urgent, what can wait and what is fine as it is, so you can decide on repairs with the full picture.

FAQ

Common questions

Don’t see your question? Call (843) 895-6422 and we’ll talk it through.

How do I know if my chimney needs a new liner?

Common signs include cracked or missing flue tiles, moisture or staining on walls near the chimney, debris at the base of the flue, poor draft, or a recent appliance or fuel change. An inspection confirms whether relining is needed.

Do I need a new liner if I switched from oil to gas?

Often, yes. In New York City the chimney has to be evaluated during an oil-to-gas boiler conversion, and gas exhaust produces acidic condensate that can corrode a masonry flue, so a new liner is frequently required.

What type of liner will you install?

It depends on the appliance and the chimney. Stainless steel liners are common for gas, oil and insert installations, while cast-in-place liners can suit some masonry chimneys. We recommend an option after inspecting the flue.

Will I lose heat or hot water during the installation?

If the chimney serves your boiler or water heater, those appliances are usually off for part of the job. We explain the timing in advance so you can plan around it.

Do you inspect the chimney before installing a liner?

Yes. We inspect every chimney before relining, typically with a camera, so the liner is sized correctly and any other issues are found first.

Do you serve neighborhoods near Manhattan Beach?

Yes. Along with Manhattan Beach, we serve Sheepshead Bay, Gerritsen Beach, Madison, Marine Park, Mill Basin and the rest of Brooklyn.

Find Out What Your Chimney or Vents Need

Schedule an inspection and we will show you what we find, explain your options and give you a written price before any work begins.

(843) 895-6422
Call (843) 895-6422 Request Service