Skip to content

Chimney Repair in Sheepshead Bay, Brooklyn

Serving Sheepshead Bay and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (843) 895-6422

The short answer

Chimney repair in Sheepshead Bay usually means fixing worn mortar joints, cracked crowns, loose flashing, damaged caps or flue liners that no longer protect the masonry. ApexHearth inspects the chimney first, shows you what we found and recommends only the repairs the chimney needs to work safely.

Sheepshead Bay has a wide mix of homes: detached and semi-detached houses, two-family homes, attached rowhouses and pre-war apartment buildings. Many of their chimneys have spent decades taking wind, rain and freeze-thaw cycles, and the neighborhood's spot near the water adds damp air and steady weather exposure. ApexHearth Chimney Services repairs chimneys across ZIP code 11235, about 2 miles south of our Brooklyn office. Our certified technicians find out what is actually wrong, explain it in plain terms and fix the cause, not just the part you can see from the sidewalk.

Common Chimney Problems in Sheepshead Bay Homes

Most chimney damage starts with water. Once moisture gets into brick and mortar, each freeze and thaw widens small cracks a little more. Homes close to the bay and the ocean also catch more wind-driven rain than homes farther inland, so exposed chimneys tend to show wear sooner.

Here is what we find most often on houses and small buildings in the area:

  • Crumbling or recessed mortar joints that need repointing
  • Cracked or broken chimney crowns that let water into the top of the stack
  • Flashing that has pulled away from the roof, causing leaks in ceilings and attic spaces
  • Missing or rusted chimney caps that let in rain, debris and animals
  • Spalling brick, where the face of the brick flakes or pops off
  • Cracked, deteriorated or missing flue liners
  • Leaning or loose upper courses of brick that need partial rebuilding
Chimney Repair at a home

How We Approach a Repair

Every repair starts with an inspection. The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year, and it describes three inspection levels. A Level 1 inspection covers the accessible parts of the chimney when nothing has changed. A Level 2 inspection is used when the system changes, such as a new appliance or a switch in fuel, or when the home is sold. A Level 3 inspection is reserved for cases where a hidden hazard has to be reached by opening part of the chimney or building.

After the inspection we walk you through what we saw, using photos where we can, and separate the urgent repairs from the ones that can be planned. A stain on an upstairs ceiling, for example, might trace back to flashing, a cracked crown or porous brick. We look for the real source so you don't pay to fix the wrong thing.

Liners and Oil-to-Gas Conversions

Many older homes and apartment buildings in Brooklyn were built to burn heating oil. When a New York City building converts its boiler from oil to gas, the chimney has to be evaluated as part of the work. A new liner is often needed, because gas exhaust produces acidic condensate that can corrode a masonry flue from the inside.

If you are planning a conversion, or one has already been done and the flue was never checked, we can inspect the chimney and recommend a liner that suits the appliance. A damaged or unlined flue can let exhaust and moisture into the masonry, so this is a repair worth taking care of before the heating system runs full time.

Time for your annual chimney check?

Timing Repairs Around the Heating Season

New York City's heat season runs from October 1 through May 31. During those months, building owners must keep apartments heated to the city's minimum temperatures. For owners of two-family homes and apartment buildings in Sheepshead Bay, a chimney problem that forces the boiler offline in January is a serious headache.

The easiest time to handle masonry and liner work is late spring through early fall, before the boiler is needed every day. If something goes wrong in the middle of winter, we will assess it and tell you plainly whether the system is safe to keep running while a repair is scheduled.

Serving Sheepshead Bay and Nearby Neighborhoods

We work throughout Sheepshead Bay and in the nearby neighborhoods of Manhattan Beach, Gerritsen Beach, Madison, Marine Park and Mill Basin. Whether you own a detached house, an attached rowhouse or a pre-war walk-up, our certified technicians can inspect your chimney, explain your options and complete the repair with care for your roof, your home's interior and your neighbors' property.

More services in Sheepshead Bay

Related

Chimney sweep cleaning a brick chimney on a rowhouse roof

Book Chimney Repair in Sheepshead Bay

Serving Sheepshead Bay and nearby cities.

  • Diagnosis before any repair
  • Written price up front
  • Written price before we start

What to expect

How a visit goes

  1. Inspection comes first

    Before we sweep, patch or replace anything, we look at the whole system and tell you what we see in plain language.

  2. Your home stays clean

    We cover the work area, run vacuum equipment that contains soot and dust, and leave the room the way we found it.

  3. You make the call

    We lay out what is urgent, what can wait and what is fine as it is, so you can decide on repairs with the full picture.

FAQ

Common questions

Don’t see your question? Call (843) 895-6422 and we’ll talk it through.

How do I know if my chimney needs repair?

Common signs include water stains near the chimney, loose or flaking brick, mortar crumbling out of the joints, pieces of masonry or tile in the firebox, a missing cap or a chimney that looks like it is leaning. An inspection will confirm the cause.

Does living near the water affect my chimney?

Homes near the water often get more wind-driven rain and damp air. Moisture is the main cause of masonry damage, so exposed chimneys in Sheepshead Bay can wear faster and are worth checking every year.

Do I need a new liner if my building switched from oil to gas?

Often, yes. When a New York City building converts from oil to gas, the chimney has to be evaluated, and a new liner is frequently needed because gas exhaust creates acidic condensate that can corrode a masonry flue.

How often should my chimney be inspected?

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. A more detailed inspection is appropriate after a fuel or appliance change, or when a home is sold.

When is the best time to schedule chimney repairs?

Late spring through early fall works best, because it is before New York City's heat season starts on October 1 and boilers are needed every day.

Do you work in neighborhoods near Sheepshead Bay?

Yes. We also serve Manhattan Beach, Gerritsen Beach, Madison, Marine Park and Mill Basin.

Find Out What Your Chimney or Vents Need

Schedule an inspection and we will show you what we find, explain your options and give you a written price before any work begins.

(843) 895-6422
Call (843) 895-6422 Request Service